Yucatan Knot (85% aka Tony Jones Leader).To attach the leader to your main line there are a selection of suitable knots: Beware if you fish reel low with a long rod that leaders are long enough, some of the lower diameter tapereds designed for carp fishing may not be long enough for all sea angling rod lengths.ДЄs a chain is only as strong as its weakest link it's equally important when shore fishing that the knots you use do not reduce the strength of the line - a 60lb shock leader is no use if a poor knot is used and reduces the breaking strain to 20lb. The smallest knot can be tied (double blood knot) and this will run through reel and rings smoothly. Tapered shock leaders are especially effective where a large leader knot may restrict casting performance, such as when using a fixed spool reel or a multiplier with a level line mechanism. This will cushion the pressure as you cast and prevent break offs. Both the shock leader and the rig body should be at least 10lb breaking strain for every 1oz of leader being used, e.g.

This begins with a shock leader and rig body made from line strong enough to withstand the extra strain caused when casting, as the rod is brought round in the cast and the line is prevented from leaving the reel, a vast amount of force is exerted on the line, if the line is not strong enough it will break and can often cause the entire rig with weight to fly off at an angle up the beach, if this hits someone it will seriously hurt them!ДЄ shock leader is a length of line strong enough to take this added pressure, that generally when casting runs from the rig top through the rod rings and then 6-10 turns around the reel spool, in general around 30ft in length is plenty. When fishing from a beach or pier and casting a 5 or 6oz of lead, it is vital for your safety and that of others that you use the correct tackle.

Snood plus crack